Victron Blue Smart IP22 Charger 24/16(1) 230V

Victron Blue Smart IP22 Charger 24/16(1) 230V

IR NOLIKTAVĀ!

– Victron-Blue-Smart-IP22-Charger-180-265-VAC-Datasheet

Lādētājs svina-skābes un LiFePO4 akumulatoriem
Зарядное устройство для свинцово-кислотных и LiFePO4 батарей
Charger for lead-acid and LiFePO4 batteries

Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

Adaptive 5-stage charge algorithm: bulk-absorption-recondition-float-storage
The Blue Smart Charger features a microprocessor controlled “adaptive” battery management. The “adaptive” feature will automatically optimise the charging process relative to the way the battery is being used.

Storage Mode: Less maintenance and aging whenthe battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to “equalize” the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually

Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Input voltage range – 180-265 VAC
Charge current, normal mode – 16A
Number of outputs – 1
Battery connection – Screw terminals 13 mm² / AWG6
Weight – 1,3 kg
Dimensions (hxwxd, mm) – 235x108x65